Opal 4-Color Anti-Rabbit IHC Kits
The Opal 4-Color Anti-Rabbit IHC Kits are immunohistochemistry detection kits that enable multiplex imaging of mouse tissue whilst retaining spatial context. They have been optimized for use on mouse FFPE tissue and configured and validated for imaging on the Vectra®, Vectra® Polaris™ and Mantra™ systems.
Catalog Number |
Name | Link to Shop Online |
size |
NEL830001KT | Opal 4-Color Anti-Rabbit Automation IHC Kit 50 Slide | 50 slides |
NEL840001KT | Opal 4-Color Anti-Rabbit Manual IHC Kit 50 Slide | 50 slides |
Product Details
The Opal 4-Color Anti-Rabbit Automation IHC Kit contains:
- 3 reactive fluorophores (Opal 520, Opal 570 and Opal 690)
- Spectral DAPI
- 1X Plus Automation Amplification Diluent
- Blocking/Ab Diluent
- Opal Polymer Anti-Rabbit HRP
Users should source primary antibodies and other workflow reagents separately. The Opal 4-Color Anti-Rabbit Automation IHC Kit has been optimized for use on the Leica Biosystems BOND RX with mouse FFPE tissue and configured and validated for imaging on the Vectra®, Vectra® Polaris™ and Mantra™ systems. These immunohistochemistry kits contain enough reagents to stain 50-slides at the recommended 1:150 dilution ratio.
The Opal 4-Color Anti-Rabbit Manual IHC Kit contains:
- 3 reactive fluorophores (Opal 520, Opal 570 and Opal 690)
- Spectral DAPI
- 1 X Plus Amplification Diluent
- Blocking/Ab Diluent
- Opal Polymer Anti-Rabbit HRP
Users should source primary antibodies and other workflow reagents separately. The Opal 4-Color Anti-Rabbit Manual IHC Kit has been optimized for use on mouse FFPE tissue and configured and validated for imaging on the Vectra®, Vectra® Polaris™ and Mantra™ systems. These immunohistochemistry kits contain enough reagents to stain 50-slides at the recommended 1:100 dilution ratio.
Specifications
Shipping Condition | Blue Ice |
Sample | Human or Mouse |
Product Category | Opal Kits |
Type | Opal Detection Kit |
Detection Method | Mantra and Vectra Quantitative Pathology Imaging Instruments |
Workflow
- Bake at 60 C for one hour
- Xylene wash (3x ten minutes)
- Rehydrate with EtOH gradient into di H2O
- 10% NBF for 20 minutes
- Di H2O wash
- AR6 or AR9 MWT
- Cool to RT for at least 15 minutes
- Di H2O rinse, TBST rinse
- PAP pen barrier
- Incubate tissue for 10 minutes in blocking solution at RT
- Remove blocker and add primary antibody
- Rinse with TBST, then wash 3 times for two minutes each in TBST
- Incubation 10 minutes at RT
- Rinse with TBST and wash 3 times for 2 minutes each
- Opal fluorophore incubation for ten minutes at RT
- Rinse with TBST and wash 3 times for 2 minutes each
- Rinse slides with AR6 or AR9
- Place slides in microwave-safe jar, perform MWT
- Cool to RT for at least 15 minutes
- Use AR6 for MWT prior to DAPI for removal of any unbound fluor
- Rinse slides in di H2O and then TBST
- Incubate DAPI for 5 minutes at RT
- Wash with di H2O and TBST two minutes each
- Apply monunting medium for fluorescene microscopy for coverslip
Documents
Download Data Sheet for Manual Kit
Download Data Sheet for Automation Kit